Senze has the high precision 5-axis cnc machine to make complex prototype. The spider prototype is created by us this month, we can make any complex small parts like this, if you have any parts which require 5 axis, please feel free to contact our sales. We will get back to you soon.
In order to ensure the precision of precision machining. Many workpieces are subjected to cutting force, high clamping force, and high calorific value, so rough machining and finishing should be carried out separately. Because of rough machining. It is very easy to cause the surface to harden, and the workpiece has a large internal stress. If the finishing and roughing are continuous finishing, the precision of the fine parts will be spread again with the ground stress, and it will be quickly lost. For some parts with high machining accuracy. After rough machining and before finishing machining, ultra-low temperature quenching or aging treatment should be carried out to remove internal stress.
The main process of rough machining is to disconnect most of the machining allowance, and the rough machining CNC lathe only needs high-power, low-precision production and processing. Finishing requires a finer CNC lathe. For rough and finishing machining on different CNC lathes, higher machining accuracy is not specified. thus. It can not only make full use of the characteristics of machinery and equipment, but also increase the service life of precision machinery.
Heat treatment is often required during machining. The distribution of the heat treatment process is as follows: In order to improve the cutting performance of the metal. It is usually carried out before machining. In order to remove the internal stress, such as quenching, quenching, heat treatment and so on. Such as aging treatment and quenching and tempering treatment, etc., generally after rough machining, before finishing. In order to improve the physical properties of the parts, nitriding, heat treatment, quenching, etc. are generally carried out after mechanical processing. If there is deformation after heat treatment, the final production process must be allocated.
Post time: Jul-19-2021